|
|
|
Heated Incubator-Cover, TC-CW/L
This heated enclosure can provide controlled environment on top
of any surface. Simply place the cover on top of your sample, and
connect to a temperature controller. If connected to CO2/O2 controllers
can regulate gas composition (CO2, and hypoxia). Multiple ports can be
used to connect to perfusion lines. Designed to provide enough
space for accessories: electrodes and tubing.
Clearance inside cover is 16/9.5mm, (22mm total height). Low profile cover is
also available, 15.5mm total height (actual distance from sample to
the top surface can be less, if your sample is elevated on a slide
inside the cover, for example). Incorporates port for CO2 gas mixture.
Requires a temperature controller.
Can be used in combination with smaller heaters inside and an objective heater for immersion optics. Can be used for long-term imaging.
Specifications: |
Outside dimensions: | 157x108
x 22mm (15.5mm for TC-CL) |
Optical top window: | 81x121mm |
Height (inside vertical clearance): | 9.5mm for
TC-CL; 16mm for TC-CW; can be
elevated 9.5mm with optional spacers TC-I-E |
Stability: | 0.01°C |
Condensation free lid: | Uses
a built-in temperature sensor to connect to the second
channel of temperature controllers |
CO2 port: | Luer-lock connector to a source of gas mixture. |
Media exchange and perfusion: |
Multiple sealed ports to connect inflow and outflow tubing inside sample chambers. |
Click on catalog numbers below to purchase online.
Required accessories: temperature controller,
CO2/O2 controller.
Optional accessories: objective heater,
perfusion system and accessories,
flow control.
Download PDF catalog.
|
|
Bioscience Tools
ph: 877-853-9755
fax: 866-533-7490 email: info@biosciencetools.com
|
PRICES AND OPTIONS |
TC-CW |
$1,395 |
Incubator cover for microscope stages, 81x121mm top optical window
|
TC-CL |
$1,395 |
Incubator cover for microscope stages, low profile, 86x65mm optical window on top. The decreased height of this incubator allows using condensers for DIC and phase contrast optics:
15.5mm from top cover to the sample plane. Note: not recommended for use
with perfusion and media exchange tubing holders inside the incubator.
|
TC-I-E |
$295 |
Spacer to elevate the cover 9.5mm
|
|
|