Microscope Adapters
 

Miniature Holders > Microscope Accessories

Miniature accessories for custom adjustable holders

The sets below allow you to build adjustable holders for any purpose. The example on the right is an adjustable magnetic stand-holders for an in vivo heated plate constructed using x4 MTH1 bases, x4 1in. extensions, x4 right-angle clamps MH-RA, and a threaded rods set, MH-TRDS. The stands can be elevated to the required heights to accommodate different size animals. Click on image to enlarge.


Adjustable Tilt Miniature Magnetic Base, MTH1
This adjustable base can be used to fix your miniature accessories, from tubing and manifolds to electrodes and sensors, right on your microscope stage. Measures only 3/4in. in diameter and height. Removable tilting part with 4mm through hole. The base allows you to attach different extensions. Requires a magnetic microscope adapter. The magnet can be removed to mount on included screw-type adapters for M6 and 1/4-20 threaded surfaces. This is a part of MTH system. Click on image to enlarge.


Extensions set, 1in.long, and Right-Angle extension, MH-E
This set of two 1in. long extensions includes thumb screws and nuts to extend your accessories to the required length. The right-angle extension provides extra flexibility for adjustment in 3-D space. Click on image to enlarge.


Extension with Double Tubing/Electrode Clamp, MTH-T
This extension fits inside MTH1 base to provide means to fix your electrodes, tubing and sensors around your sample. Extends up to 3in. This is a part of MTH system. Can fix tubing up to 4mm O.D.


Miniature Ball-Joint with Right-Angle Extension, MH-RB
This adjustable extension can be used to position your miniature accessories in any direction and angle. The right angle attachment provides extra freedom to adjust height and length. Ideal to fix tubing above your sample. Incorporates tubing clamp. Can be used to attach double tubing/electrode holder/clamp of MTH-T as well. Extends up to 2in. Does not obstruct optical field. This is a part of MTH, MH-1 and MH-2 systems.


Miniature Right-angle clamp MH-RA
Creates flexible joint at a right-angle. Includes a tubing clamp. Ultra-miniature size allows you to fix accessories inside small compartments.


Mounting Adapter, MTH-SCR
Allows you to attach MTH, MMH and ZMM miniature holders to unthreaded non-magnetic surfaces with through holes. Click on image to enlarge.

Set of 4-40 threaded rods MH-TRDSA set of assorted length, x5, and a set of plastic washers/spacers.

Set of threaded stand-off MH-MS A set of threaded stand-off, self-adhesive strip and mounting nut to attach miniature holders to any surface with M2.5, M3.5 or M4 threaded holes, or on any surface using the self-adhesive strip.

Click on catalog numbers below to purchase online.

Download PDF manual.

Download PDF catalog.

Bioscience Tools
ph: 877-853-9755
fax: 866-533-7490
email: info@biosciencetools.com


PRICES AND OPTIONS

MA

$195

Since most microscope stages are not magnetic, an iron stainless adapter is recommended when using magnetic holders. The middle opening will fit our perfusion chambers, standard 35 mm Corning petri dishes, glass bottom dishes (both 35 and 50mm), and our heated chambers. Can be also used to position miniature manipulators. Choose the size appropriate for your microscope.

MTH1

$45

Adjustable Tilt Miniature Magnetic Base

MH-E

$45

Extensions set, 1in. long and right-angle

MTH-T

$45

Extension with Double Tubing/Electrode Clamp

MH-RB

$45

Miniature Ball-Joint with Right-Angle Extension

MH-RA

$45

Miniature Right-angle clamps

MTH-SCR

$25

Mounting Adapter. Allows you to attach MTH, MMH and ZMM miniature holders to unthreaded non-magnetic surfaces with through holes.

MH-TRDS

$25

Set of 4-40 threaded rods, assorted length, x5, and a set of plastic washers/spacers.

MH-MS

$45

Set of threaded stand-off, self-adhesive strip and mounting nut to attach miniature holders to any surface with M2.5, M3.5 or M4 threaded holes, or on any surface using the self-adhesive strip.