|
|
| |
|
Multi-channel system to control and process microscopic samples.
This is a
computerized setup/robot to manipulate environment in small volumes - around
live samples, for example. The miniature size allows you to process samples
directly on microscope stages. This can be used to relate live and processed
samples before and after treatment, for example, because you do not have to
remove samples from the microscope stage. Can be used with any cell chambers,
including LabTek chambered coverglass from Nunc and multi-well plates. The
minimum 2-channel configuration shown includes 2-channel solution handling unit and
8-channel solution switch to mix up to eight
different solutions. The system can be configured so that there is no
contamination between critical components/reagents. Shipped with
control software installed on a computer. Can be
preprogrammed for any protocol, including cell staining and labeling. Systems
with temperature and gas environment control are also available. Can be used
without microscope to automate labeling/staining and processing
of coverslips and microscope slides. Click on image to enlarge.
Click on catalog numbers below to purchase online.
Download PDF catalog.
|
|
Bioscience Tools
ph: 1-877-853-9755
ph: 1-858-537-1062 (from outside USA)
fax: 1-619-582-0919
email: info@biosciencetools.com
|
PRICES AND OPTIONS |
CFPS-R2 |
$11,950 |
Multi-channel system to control and process microscopic samples
|
|
|
)