|
|
| |
|
|
2-Channel heating Temperature Controller TC-2D with RS232/USB interface Flexible controls for stable
operation. Multiple temperature probes to choose for feedback.
- Range from 0 to 100°C with accuracy 0.1°C.
- Built-in overheating protection.
- Inputs for programmed temperature changes.
- Analog and Digital Outputs to monitor temperature.
- Digital RS232 interface for software control.
Up to 10 units can be connected together to control from a single
computer port. Can be connected to flow
controllers and enhanced perfusion
controllers to operate from the same computer port. Can be used with
objective heaters and with perfusion
systems. Most heating stages work as inline solution
pre-heaters. Comes with cables and temperature sensors. External 120/240VAC power supply included.
2-Channel heating Temperature Controller TC-2-100
A simplified version of TC-2D controller, with the same features but without digital interface.
Specifications (for each channel): |
Dimensions: | 6x9in. |
Temperature sensors: | 1. miniature 0.87mm diameter 50°C range (fits small volume chambers)
2. external sensor 0-100°C range |
Stability: | 0.1°C |
Settings: | 3-tier flexible, allow to stabilize temperature in different sample volumes and heating stage sizes |
Feedback: | Stage, External sensor 1 (Bath), External sensor 2 (Bath 2) |
Click on catalog numbers below to purchase online.
Required accessories: heating stages.
Optional accessories: perfusion system,
flow control.
Download PDF manual.
Download PDF catalog.
|
|
Bioscience Tools
ph: 1-877-853-9755
ph: 1-858-537-1062 (from outside USA)
fax: 1-619-582-0919
email: info@biosciencetools.com
|
PRICES AND OPTIONS
Perfusion
System Accessories |
TC-2D |
$2,150 |
2-Channel Temperature Controller with digital interface
|
TC-2-100 |
$1,655 |
2-Channel Temperature Controller
|
TC-TP-100 |
$95 |
Replacement Temperature Probe, 0 to 100°C range
|
TC-TP |
$95 |
Replacement miniature 0.87mm Temperature Probe,
range room - 50°C range
|
TC2-TCR |
$135 |
Replacement Cable Assembly an easy-disconnect
cable for TC-1-100, TC-2-100 and TC-2D controllers. Can be also used to monitor
temperature through the second channel of 2-channels controllers. A
heating element can be attached to the cable connector.
|
|
|
Features & Options |
TC-2D, $2,150 |
TC-2-100, $1,665 |
TC-1-100, $750 |
TC-1, $1,295 |
BTC-100, S1,495 |
Petri dish heaters |
* |
* |
* |
* |
* |
Heated chambers for coverslips |
* |
* |
* |
* |
* |
Miniature Incubators |
* |
* |
* |
* |
* |
Open heated chamber for water immersion |
* |
* |
* |
* |
|
Built-in inline preheater |
* |
* |
* |
* |
* |
Miniature heated manifold for local
superfusion |
* |
* |
* |
* |
* |
Objective heater |
* |
* |
* |
* |
|
Heater for ultra-thin sealed imaging chambers |
* |
* |
* |
* |
* |
Heated glass plate |
* |
* |
* |
* |
* |
Imaging slide heaters |
* |
* |
* |
* |
* |
Perfusion chambers with heated bottom |
* |
* |
* |
* |
* |
Large volume heated bath/dissecting chamber |
* |
* |
* |
* |
* |
Overheating protection |
* |
* |
* |
* |
* |
Multiple temperature probes for feedback |
* |
* |
* |
* |
* |
Temperature Set/Monitor, Analog |
* |
* |
* |
* |
* |
Temperature Set/Monitor, RS232 |
* |
|
|
|
|
Use for Electrophysiology (Low noise) |
|
|
|
* |
* |
Cooling |
|
|
|
|
* |
|
|