|
|
| |
|
|
Perfusion Controller, CFPS-UC2
Universal controller for precise control of solution flow rates from
0.34microL/min to 22ml/min. Included with flow control systems above. Can
control flow rates in up to eight channels and can switch up to eight different solutions through each
channels (if combined with perfusion systems). Can read up to
eight analog signals (temperature, for example) to automate environment control.
Each channel controlled manually (only 2-channels), by analog signals, TTL and
through RS232 port. Up to 10 controllers can be connected in chain through RS232
ports. Controllers for manual control of more than two channels are also
available. Can be used with our optional disposable flower meter and high power
switch to setup an automated system to measure and dispense solutions using high
flow rate pumps in the range from 70ml/min to 25 l/min, with precision of
200µl.
Additional 2-Channel upgrade, CFPS-2U
Adds another two independent channels. Turns ON/OFF independently by analog
signals, TTL or/and RS232 connection, or manually (depending on the controller
used). Attached together to another system, forms a single unit. Can be mounted
horizontally, vertically or simply left on the desktop. Includes mounting
hardware. Tubing is not included
Mounting Brackets Kit, CFPS-MB
Allows to attach multiple flow control units together into one solid piece.
Includes 2 brackets (top and bottom) and 12 screws.
Fitting kit, CFPS-fit
Includes a set of fitting for tubing used inside controlled flow system and microbore tubing, including our Teflon, polyimide, and
polyethylene PPT tubing.
Flow Control Connectors Set, FC-SET
Set of fitting, mixers and manifolds for microbore tubing, including our Teflon, polyimide, and polyethylene tubing PPT. For use with controlled flow systems. Includes Y and T connectors, 4, 5, 6 and 9-channels
manifolds (one of each).
8-Channel Enhanced Perfusion Controller, CFPS-C8
Similar to the above 8-channel controller, plus enhanced features, which
facilitate building software controlled perfusion systems. In addition to manual
control, flow rate can be regulated through sending software code over serial
RS232 (or USB) connection. Has additional two 8-bit digital I/O ports to control
external devices, plus four 10-bit analog inputs to read external signals
(temperature, for example). The I/O ports can be used to control PC-16 perfusion controllers to switch multiple solutions
through the same channel or high power switches to turn high current devices
(pumps, for example). The controller has two inputs for our disposable flow
meters to work with high flow rate pumps. Up to ten controllers can be linked
together to receive software commands from the same computer through RS232/USB
connection.
12V-Battery, BAT-12V
with charger
Rechargeable 12V 8AH battery. Includes charger and cables. Can be used to power
our perfusion systems and temperature controllers.
Optional accessories: perfusion system,
flow control.
Download PDF catalog.
|
|
Bioscience Tools
ph: 1-877-853-9755
ph: 1-858-537-1062 (from outside USA)
fax: 1-619-582-0919
email: info@biosciencetools.com
|
PRICES AND OPTIONS |
CFPS-fit |
$270 |
Fitting kit |
CFPS-ST-15 |
$60 |
Tubing set, 0.015", x5 |
CFPS-ST-20 |
$60 |
Tubing set, 0.020", x5 |
CFPS-ST-31 |
$60 |
Tubing set, 0.031", x5 |
CFPS-ST-62 |
$60 |
Tubing set, 0.062", x5 |
CFPS-ST-93 |
$60 |
Tubing set, 0.093", x5 |
CFPS-DT-15 |
$150 |
Dual tubing set, 0.015", x5 |
CFPS-2U |
$1,585 |
Additional 2-Channel upgrade. Adds another two parallel channels. Turns ON/OFF independently by
analog signals, TTL or/and RS232 connection (no manual control). Attached together to another system, forms a single unit. Includes mounting hardware. Tubing is not included.
|
CFPS-UC2 |
$1,600 |
Perfusion Controller. Universal controller for precise control of solution flow rates. Included with flow control systems above. Can control flow rates in up to eight channels and up to eight solenoid switching channels. Can read up to eight analog signals (temperature, for example) to automate environment control. Can be used with our optional disposable flow meters and high power switch to setup an automated system to measure and dispense solutions using high flow rate pumps in the range from
70ml/min to 25 l/min, with precision of 200µl. Controlled manually (only 2-channels), by analog signals, TTL and through RS232 port. Up to 10 controllers can be connected in chain through RS232 ports. Controllers for manual control of more than two channels are also available.
|
CFPS-C8 |
$2,760 |
8-Channel Perfusion Controller Used with multipple 2-channel modules to form multi-channel controlled flow
system to perfuse several setup in parallel or to mix several solutions. The
2-channel modules can be mounted together to form a single unit or separately
for multipple individual setups. Convinient manual flow control by 10-turn
dials. Reverse direction mode. Fast overdrive mode to fill the lines. Automatic
mode to switch back to control solutions automatically. Analog input for each
channel to control flow rate. Switch manually, by TTL inputs and through serial
RS232 port. Compatible with data acquisition systems and imaging software. solenoid solution switch in a combination system.
|
CFPS-UC8 |
$3,100 |
8-Channel Enhanced Perfusion Controller Similar to the above 8-channel controller, plus enhanced features, which
facilitate building software controlled perfusion systems. In addition to manual
control, flow rate can be regulated through sending software code over serial
RS232 (or USB) connection. Has additional two 8-bit digital I/O ports to control
external devices, plus four 10-bit analog inputs to read external signals
(temperature, for example). The I/O ports can be used to control our PS25
perfusion systems to switch multiple solutions through the same channel or high
power switches to turn high current devices (pumps, for example). The controller
has two inputs for our disposable flow meters to work with high flow rate pumps.
Up to ten controllers can be linked together to receive software commands from
the same computer through RS232/USB connection.
|
BAT-12V |
$250 |
Battery, 12V, with charger
|
CFPS-MB |
$40 |
Mounting Brackets Kit
|
DB9-C |
$95 |
Cable to connect to PC-16 controller: Allows you to switch channels of PC-16 valve controller by programming
PC-16-232UP or CFPS-U2 controllers. Use your software and the same computer port
to expend your setup. By switching additional tubing lines you can add different
solutions to your sample through the same flow control unit. Plugs to DB-9
connectors on the back of the controllers. Two feet long. Longer cables are
available. Note: cannot be used with CFPS-C8 controller. |
DB15-C |
$95 |
Cable to connect CFPS-2U units: Allows you
to connect additional CFPS-2U units to the same controller CFPS-uc2 or CFPS-uc8.
Three feet long. Longer cables are available. |
CFPS-S |
$25 |
Replacement protective tape, x2 |
|
|
)
)