Gas Mixture Delivery Adapter
Adapter for syringe holders to connect to a gas source to saturate/bubble eight solutions
during experiments (CO2 saturation or oxygenation, or pressurizing the solution.) Comes with X-block to fit 0.5 in. posts.
Includes 9 stop-cocks and plugs to close unused channels or the common inlet. It also comes with tubing and fitting to connect to
output barbs and thin tubing to form bubbles inside the solutions. Can be used with stones, or any other
diffuser, to bubble
larger volumes. Can be also used to pressurize solutions by connecting to pressure cylinders PC. Can be connected to another adapter
to use the same source of gas mixture/pressure. Click on image to enlarge. Download manual.
Pressure regulator
For use with small volume delivery and solution switches
with pressure cylinders.
Connects to a cylinder with a compressed gas mixture (max. input 100PSI).
The controller regulates output pressure of gas mixture, 5%CO2/95%O2 for example. Simple to use.
Click on image to enlarge.
Specifications: |
Input: | max 100PSI |
Output: | max 25PSI |
Connectors: | Easy-connect,
5/32in. (4mm) O.D. tubing |
Indicators: | PRESSURE digital indicator,
output LOW, output CLOSE |
Controls: | INPUT PRESSURE
regulator 0-100PSI, CLOSE switch, CLOSE TTL input (+5V),
OUTPUT PRESSURE settings, MANUAL dial to SET pressure, EXTERNAL input to SET pressure, MONITOR pressure - analog output |
Dimensions: | 6 x 2.5 x 9in. |
Power: | Includes external 120/230VAC power supply |
Click on catalog numbers below to purchase online.
Required accessories: pressure regulator,
perfusion system.
Optional accessories: pressure cylinders.
Download PDF catalog.
|
)
)